FAQ
Q:Does this device feature audio recording? +
Yes, this device supports voice recording. Users are required to strictly adhere to all applicable local laws and privacy regulations regarding audio recording.
Q:Can the indicator lights on the outlet be turned off? Where is the camera light located? +
A:There are two separate lights on the outlet:
• Power Indicator (Center Blue Light): Stays on continuously while powered and cannot be turned off.
• Camera Indicator (Top Pinhole): Located in the small hole directly above the outlet, this light flashes red and blue during operation. This light can be turned off via the app.
• Power Indicator (Center Blue Light): Stays on continuously while powered and cannot be turned off.
• Camera Indicator (Top Pinhole): Located in the small hole directly above the outlet, this light flashes red and blue during operation. This light can be turned off via the app.
Q: Does it support motion detection, and how do I set it up? +
Yes, motion detection is fully supported. Here is how to set it up:
1. Set Motion Recording: Open the app, go to Device Settings > SD Card Settings, and set the recording mode to Motion Detection.
2. Adjust Sensitivity: Go to Alarm Config and set the sensitivity level to Medium. (Note: Setting it to "High" may trigger false alarms caused by wind or changes in lighting.)
3. Enable Notifications: Once connected to your home Wi-Fi, turn on app notifications on your smartphone. You will receive real-time motion alert notifications anywhere in the world as long as you have an internet connection.
1. Set Motion Recording: Open the app, go to Device Settings > SD Card Settings, and set the recording mode to Motion Detection.
2. Adjust Sensitivity: Go to Alarm Config and set the sensitivity level to Medium. (Note: Setting it to "High" may trigger false alarms caused by wind or changes in lighting.)
3. Enable Notifications: Once connected to your home Wi-Fi, turn on app notifications on your smartphone. You will receive real-time motion alert notifications anywhere in the world as long as you have an internet connection.
Q: Is it easy to connect? +
Yes, once you understand the basic setup logic, it's very simple. Generally, there are three modes:
1. Wi-Fi Mode: Connect the device to your home router's Wi-Fi network for remote access.
2. Direct Connection Mode: If you don't have Wi-Fi or prefer not to use a network, connect your phone directly to the camera's local Wi-Fi signal.
3. Standalone MicroSD Card Recording: If you don't want to use any wireless network for maximum security, simply insert a MicroSD card. The camera will automatically record audio and video. You can then remove the card to read the files on your phone or computer.
1. Wi-Fi Mode: Connect the device to your home router's Wi-Fi network for remote access.
2. Direct Connection Mode: If you don't have Wi-Fi or prefer not to use a network, connect your phone directly to the camera's local Wi-Fi signal.
3. Standalone MicroSD Card Recording: If you don't want to use any wireless network for maximum security, simply insert a MicroSD card. The camera will automatically record audio and video. You can then remove the card to read the files on your phone or computer.
Q: Is the app easy to install, can I use it without cloud services, and how long can a MicroSD card record? +
A: Yes, the camera uses the LookCam app, which requires no registration—just download it and start using it immediately.
Cloud storage is completely optional. You can store everything locally on the MicroSD card and read or download the footage directly through the app remotely, or read the card using a card reader.
In terms of storage capacity, a 3-minute video segment takes approximately 25 MB (about 500 MB per hour). A 32GB MicroSD card can record for approximately 60 hours of continuous footage. You can also turn loop recording and auto-overwrite on or off according to your preference.
Cloud storage is completely optional. You can store everything locally on the MicroSD card and read or download the footage directly through the app remotely, or read the card using a card reader.
In terms of storage capacity, a 3-minute video segment takes approximately 25 MB (about 500 MB per hour). A 32GB MicroSD card can record for approximately 60 hours of continuous footage. You can also turn loop recording and auto-overwrite on or off according to your preference.
